, ,

SoliSense – Suspended Solids

Whatever level of suspended solids from 2 NTU all the way up to >8% solids, the New SoliSense® is the solution. A sophisticated sensor that ranges from 2 NTU to 8% solids (in waste water, up to 50% in other solids), this suspended solids monitor is the solution, and is unique in its ability to measure from low NTU to percent solids in one sensor.

Suspended Solids Meter Principle of Operation

           The SoliSense® Turbidity Meter Suspended Solids Analyzer instrument uses two light emitters and four detectors arranged around a circular aperture. This eliminates interference from extraneous light sources and compensates for detector soiling and the aging of the optical modules. The arrangement of this 8 beam technology allows measurement of the light transmitted, scattered or reflected by a medium. This allows for the most precise measurement of turbidity or suspended solids in a liquid from 0.1 NTU up to 2% solids! For suspended solids greater than 2% please see our dry solids analyzer.

  • Auto-clean optical sensor
  • Stable and reliable – excellent process control
  • Suitable for all potable, waste and process waters
  • Up to 6 months between maintenance
  • Up to 3 months between calibration
  • From 0.1 NTU to 2% Solids

Specification

Range:                                                  Selectable 0.02 NTU to 25%* Dry Solids

Accuracy:                                             < 1% of measuring range end value

Reproducibility:                                  0.5 %

Comms:                                                TCP/IP, Modbus, RS232, RS485, 420mA

Power supply:                                    100-250 V AC, 50/60 Hz 8-36 V DC

Ambient temperature:                       -20 to +50C

Process temperature:                        0-50C

Lamp Source:                                     IR LED

Enclosure rating:                               IP65

Scroll to Top