• You've just added this product to the cart:

    ecoLine-a - Above Ground

    0 out of 5

    ecoLine-a – Above Ground

    Above ground Oil Water Separator according to EN858 und DIN1999 to separate free, non-emulsified oil from water.

    The ecoLine-a oil/water separator must be installed above grade and leveled on a solid surface and is designed to separate non-emulsified light liquids or low-water-soluble fluids with a specific gravity below 0.95 (gasoline, diesel, heating oils and other mineral oils) from effluent discharge. A two-step separation process, gravity separation and removal of small oil particles by coalescing media elements, produce high removal efficiencies.

    The ecoLine-a is made of high grade polyethylene and offers a full range of above ground oil water separators (please see the sizes below).

  • You've just added this product to the cart:

    ecoLine-b - Oil Water Separator

    0 out of 5

    ecoLine-b – Oil Water Separator

    Oil Water Separator according to EN858 und DIN1999 to separate free, non-emulsified oil from water.

                   The ecoLine-b oil/water separator is designed to separate non-emulsified light liquids or low-water-soluble fluids with a specific gravity below 0.95 (gasoline, diesel, heating oils and other mineral oils) from effluent discharge. A two-step separation process, gravity separation and removal of small oil particles by coalescing media elements, produces high removal efficiencies.

                The ecoLine-b models are made of Stainless Steel Grade 304 and high grade polyethylene and offer a full range of below ground oil water separators from 50gpm (3l/s) to 1100gpm (70l/s).

  • You've just added this product to the cart:

    ecoSep - Oil Water Separator

    0 out of 5

    ecoSep – Oil Water Separator

            Below Ground Oil Water Separator according to EN858 and DIN1999 for the separation of free non-emulsified oil from water.

          The ecoSep oil water separator is designed to separate free non-water-soluble light with a maximum specific gravity of 0.95 from water (petroleum byproducts such as gasoline, diesel and other mineral oils).

           The automatic shut-off valve stops the flow from the grit chamber either when the maximum oil storage capacity is reached or when a certain liquid level in the separation chamber is exceeded. In its closed position, the valve is tight up to 50kPa (5m total head) pressure.

           With ecoSep you receive a high-grade quality product, that (by proper use) exceeds all guidelines of European, Australian and North American Standards for oil/water separation.

  • You've just added this product to the cart:

    ECOSTOP- SPILL CONTROL

    0 out of 5

    ECOSTOP- SPILL CONTROL

    Readily prepared for the installation in a circular precast concrete structure.

    The automatic shut-off valve stops the flow from an above-grade area either when the maximum oil storage capacity is reached or when a certain liquid level in the separation chamber is exceeded. In its closed position, the valve is tight up to 0.5 bar.

    Components list:
     – Spill Control Valve
     – Float for Spill Control Valve
     – PVC Pipe
     – NBR Gasket for PVC Pipe
     – Mounting Material

  • You've just added this product to the cart:

    ecoTop - Above Ground

    0 out of 5

    ecoTop – Above Ground

    Above ground Oil Water Separator according to EN858 and DIN1999 for the separation of free non-emulsified oil from water.

             The ecoTop oil/water separator is designed to separate free non-water-soluble light liquids (as defined in the German Standard DIN1999 and the European Standard prEN 858-1) with a maximum specific gravity of 0.950 from water (petroleum byproducts such as gasoline, diesel and other mineral oils).

             The sediment and solids pre-treated runoff is gravity fed or pumped (typically with a positive displacement
    or diaphragm type pump) to the gravity separator through a submerged inlet pipe. The separation process relies on the fact, that light fluids have a lower specific gravity than water and thus float on the water surface.

             The ecoTop is made of stainless steel 1.4301, pickled and anodized after welding.

  • You've just added this product to the cart:

    EcoWarn-Level Sensors

    0 out of 5

    EcoWarn-Level Sensors

          Equipped with two probes. One is monitoring the thickness of the oil layer accumulated inside the separator, the other one is responsible for blockage detection, i.e. high level in case of sewer blockage or closure of the closing device.

    ecoWarn is a combined control device for oil water separators to monitor the level of separated oil as well as to signalize a high liquid level inside the separation chamber.
    The device can be adapted for various different supply voltages. The measuring circle is Ex-proof (tested according to the European Standard EN 50020).
          ecoWarn is optimally designed to be used in combination with our oil water separators.