• You've just added this product to the cart:

    F-1000 Series Turbine Flow Meters

    0 out of 5

    F-1000 Series Turbine Flow Meters

            ONICON’s F-1000 Series is a family of insertion and inline style turbine meters flow meters that provide accurate, reliable flow measurement in a variety of applications. The F-1000 Series meters are suitable for use in pipes ranging in size from ¾ to 72” in diameter. Each model utilizes ONICON’s patented electronic turbine rotation sensing system and unique low mass turbine design that is accurate over wide flow ranges with excellent low flow measurement capability.

          THREE DIFFERENT STYLES

         •F-1100 single turbine insertion meters   Suitable for use in 1¼ – 72” pipes

         •F-1200 dual turbine insertion meters    Suitable for use in 2½ – 72” pipes

         •F-11XX single turbine inline meters     Available as ¾ and 1” meters.

    APPLICATIONS

        •Chilled water or hot water & water/glycol solutions for HVAC

        •Domestic/municipal water

        •Clean process water

  • You've just added this product to the cart:

    F-1500 Insertion Turbine Flow Meter for Steam

    0 out of 5

    F-1500 Insertion Turbine Flow Meter for Steam

           F-1500 Series Insertion Turbine Flow Meters are designed for accurate, cost-effective mass flow measurement of steam, high temperature liquids and gases. Insertion turbine flow meters are ideal for use in larger steam lines where downsizing the line size to improve flow measurement is not desirable. In these applications, the pitch of the turbine rotor is selected to match the expected steam flow velocity range in the pipe. This optimizes the operating range of the flow meter for the application.

           The standard loop powered version of the meter is equipped with the internal temperature compensation required for direct mass flow measurement of saturated steam. Each F-1500 Flow Meter is provided with a 4-20mA analog output for flow rate, a pulse output for totalization and a built-in user interface and display. The standard loop powered meter also includes HART.

    APPLICATIONS
      • Saturated steam
      • Hot water to 450°F (232°C) standard
      • 850°F (454°C) optional
    Applications with optional pressure sensor
      • Superheated steam to 450°F (232°C) standard
      • 850°F (454°C) optional
      • Compressed air
      • Industrial gase
  • You've just added this product to the cart:

    F-2600 Series Inline Vortex Flow Meters

    0 out of 5

    F-2600 Series Inline Vortex Flow Meters

               F-2600 Series Vortex Flow Meters are designed for accurate, cost effective mass flow measurement of saturated steam. The standard loop powered version of the vortex flow meter is equipped with the internal temperature compensation required for direct mass flow measurement. Each F-2600 Vortex Flow Meter is provided with a 4-20mA analog output for flow rate, a pulse output for totalization and a built-in user interface and display. The standard loop powered meter also includes HART. Optional versions are available with internal pressure compensation, multiple analog outputs and BACnet or MODBUS serial communications.

    APPLICATIONS
      • Saturated steam
      • Hot water to 500° F (260° C) standard, 750° F (400° C) optional
    Applications with optional pressure sensor
      • Superheated steam to 500° F (260° C) standard, 750° F (400° C) optional
      •Compressed air
      •Industrial gases
  • You've just added this product to the cart:

    F-2700 Series Insertion Vortex Flow Meters

    0 out of 5

    F-2700 Series Insertion Vortex Flow Meters

              F-2700 Series Insertion Vortex Flow Meters deliver accurate mass flow measurement without the need for an external flow computer. They can be a great choice for steam and medium or high temperature hot water flow.

              In the right applications, insertion style vortex meters provide a very reliable and cost effective solution for mass flow measurement. They are often the best choice for flow measurement in larger diameter pipes where the expected process flow rates are within the operating range of the meter.

              The standard loop powered version of the vortex flow meter is equipped with the internal temperature compensation required for direct mass flow measurement of saturated steam. Each F-2700 Vortex Flow Meter is provided with a 4-20mA analog output for flow rate, a pulse output for totalization and a built-in user interface and display. The standard loop powered meter also includes HART. Optional versions are available with internal pressure compensation, multiple analog outputs and BACnet or MODBUS serial communications.

    APPLICATIONS

       • Saturated steam
       • Hot water to 500° F (260° C) standard 750° F (400° C) optional
    Applications with optional pressure sensor
       • Superheated steam to 500° F (260° C) standard 750° F (400° C) optional
       • Compressed air
       • Industrial gas
  • You've just added this product to the cart:

    F-3000 Series Inline Electromagnetic Flow Meters

    0 out of 5

    F-3000 Series Inline Electromagnetic Flow Meters

            The F-3000 Inline Electromagnetic Flow Meters are available in sizes from ¼” to 72″ and will be factory-configured for ease of installation and start-up. Typical applications include monitoring of cooling water, heating water, condenser water and domestic water.

    Applications

    • Primary/secondary decoupling loop (bypass)
    • HVAC thermal storage tank
    • Domestic water charge/discharge
    • Bi-directional process flow
    • Chilled water, hot water, condenser water & water/glycol/brine solutions used in HVAC
    • Municipal water

    Standard Features

           >  Highly Accurate     
           >  Simple Installation and Commissioning
           >  Low Maintenance
           >  Simplified Installation and Commissioning
  • You've just added this product to the cart:

    F-3500 Series Insertion Electromagnetic Flow Meter

    0 out of 5

    F-3500 Series Insertion Electromagnetic Flow Meter

          The F-3500 Insertion Electromagnetic Flow Meter is suitable for use in pipes ranging in size from 1¼” to 72″ in diameter. It features ONICON’s unique hot tap design that allows for easy insertion or removal from the pipe without the use of special tools and without disrupting flow. The low maintenance design is provided ready-to-use without the need for field programming.

          The FB-3500 Electromagnetic Flow Meter is available for bi-directional flow applications. It provides an analog output for flow rate, a contact closure output to indicate flow direction and separate pulse outputs to totalize forward and reverse flow.

    Applications

    • Primary/secondary decoupling loop
    • HVAC thermal storage tank
    • Domestic water charge/discharge
    • Bi-directional process flow
    • Chilled water, hot water, condenser water & water/glycol/brine solutions used in HVAC
    • Municipal water
  • You've just added this product to the cart:

    F-4300 Clamp-on Ultrasonic Flow Meter

    0 out of 5

    F-4300 Clamp-on Ultrasonic Flow Meter

       ONICON F-4300 Clamp-on Ultrasonic Flow Meters offer an ideal solution for liquid flow measurement in existing systems when it is impractical to install traditional inline or insertion style flow meters. The innovative design incorporates matched precision clamp-on transducers and signal processing circuitry to accurately measure the flow of most liquids over a wide velocity range. Each F-4300 is provided with transducers and easy-to-use mounting hardware, factory supplied transducer cabling, and a wall mount enclosure with an LCD and user interface keypad.
         Output signals include a single analog output and two pulse outputs. The F-4300 is also provided with an
    isolated RS485 output capable of communicating over BACnet®MS/TP or MODBUS®RTU networks. Optional

    Applications

    • Chilled water, hot water, condenser water & water/ glycol solutions for HVAC
    • Steam condensate
    • Domestic/municipal water
    • Process water & other clean liquids  
    .
  • You've just added this product to the cart:

    F-4400 Clamp-on Portable Ultrasonic Flow Meter

    0 out of 5

    F-4400 Clamp-on Portable Ultrasonic Flow Meter

           ONICON F-4400 Portable Clamp-on Ultrasonic Flow Meter is the ideal tool for testing and validating flow.
    The battery operated portable meter utilizes clamp-on transducers to measure flow through the pipe wall. It is designed for use with pipes ranging from 2” through 48” in diameter, and it works with most commonly used pipe materials. Programming is easy with the on-screen menu system. Just enter the pipe diameter, wall thickness and pipe material.
           The F-4400 can be powered for up to 18 hours using the internal, rechargeable NiMH battery, or it can be operated continuously with the AC poser adapter.

    APPLICATIONS

      • Flow testing for closed loop HVAC chilled, hot andcondenser water systems
      • Temporary flow monitoring for domestic/municipalwater
      • Flow testing for process water & other clean liquids
      • Baseline monitoring for project planning
  • You've just added this product to the cart:

    F-4600 Series Wetted Ultrasonic Inline Flow Meter

    0 out of 5

    F-4600 Series Wetted Ultrasonic Inline Flow Meter

             ONICON’s F-4600 Inline Flow Meters are designed to accurately measure the flow of water and water glycol solutions in small pipes. Meters are available for ½” – 2½” diameter pipes. The no-moving-parts design operates over a wide flow range with excellent low flow performance.

              The low cost design is provided with threaded process connections, a 4-20mA analog output and a scaled dry contact pulse output for totalization.

              *Optional integral LCD display with BACnet MS/TP or MODBUS RTU is available. LCD display can be mounted up to 5 feet away from flow body for visibility.

    Typical Applications

               The F-4600 inline flow meter is ideal for chilled water, hot water, domestic water, condenser water, steam condensate and boiler feed water.

  • You've just added this product to the cart:

    F-5400 Series Thermal Mass Flow Meter

    0 out of 5

    F-5400 Series Thermal Mass Flow Meter

             ONICON’s F-5000 Series Thermal Mass Flow Meters provide accurate mass flow measurement of natural
    gas, compressed air and other industrial gases. The proprietary sensor design measures mass flow directly and does not require additional pressure or temperature compensation to deliver accurate flow rate and total data.
              The F-5400 is available as an inline or an insertion style meter without a LCD display. This version of the meter is provided with a 4-20 mA analog output and pulse output.

    APPLICATIONS

    Accurate sub-metering of natural gas & propane for:
            •Tenant space usage
            •Boiler efficiency
            •Campus monitoring
    Also ideal for monitoring:
           •Compressed Air
           •Medical gases
           •Other industrial gases
  • You've just added this product to the cart:

    F-5500 Series Thermal Mass Flow Meters

    0 out of 5

    F-5500 Series Thermal Mass Flow Meters

              F-5500 Thermal Mass Flow Meters provide direct standard volumetric flow measurement of gases without the need for temperature and pressure compensation. Both inline and insertion versions of the flow meter are available. The insertion design allows for easy insertion or removal from the pipe without the use of special tools and without disrupting flow. Inline meters are ideal for pipes less than 1½” in diameter. The low maintenance design is provided ready-to-use without the need for field programming.

    The F-5500 flow meter includes a bright, easy-to-read user interface/display that provides rate and total data. The standard version of the meter is provided with a 4-20 mA analog output and an RS485 interface that is field configurable for BACnet® MS/TP or Modbus® RTU. A second output signal configuration is available that includes a 4-20 mA output for flow rate and a scaled pulse output for totalization or alarm indication.

    APPLICATIONS

    Accurate sub-metering of natural gas & propane for:
         •Tenant space usage
         •Boiler efficiency
         •Campus monitoring
    Also ideal for monitoring:
         •Compressed Air
         •Medical gases
        •Other industrial gases
  • You've just added this product to the cart:

    SL-100S Ultrasonic Level Meter

    0 out of 5

    SL-100S Ultrasonic Level Meter

    SL-100S with LXD-Sensor Series
    SL-100S is an ultrasonic non-contracting level meter which will increase the effectiveness of your liquid management process. It is available to connect up to two sensors. Depending on the sensor, the measurement range is 5 meters, 10 meters or 15 meters. The sensor cable can be extended up to 450meters.
    SL-100S’s user friendly interface offers the user easy installation and calibration. It is also simple and inexpensive to maintain. All functions are optimized which enables you to effectively monitor the liquid level and keep your facilities running safely and reliably.